China Wholesale SNR Manufacturers – LADP-4 Microwave Ferromagnetic Resonance Apparatus – Labor
China Wholesale SNR Manufacturers – LADP-4 Microwave Ferromagnetic Resonance Apparatus – Labor Detail:
Ferromagnetic resonance plays an important role in magnetism and even solid state physics. It is the basis of microwave ferrite physics. Microwave ferrite has been widely used in radar technology and microwave communication. Fd-fmr-a microwave ferromagnetic resonance experimental instrument produced by Shanghai Fudan Tianxin science and Education Instrument Co., Ltd. is a modern physical experimental instrument used to complete the experimental teaching of ferromagnetic resonance curve measurement of ferrite samples. It is mainly used to measure the resonance spectral lines of YIG single crystal and polycrystalline samples, measure g factor, spin magnetic ratio, resonance linewidth and relaxation time, and analyze the characteristics of microwave system. The instrument has the advantages of accurate measurement, stable and reliable, rich experimental content and so on. It can be used for senior physics students’ professional experiments and modern physics experiments.
Experiments
1. Observe microwave ferromagnetic resonance phenomena of ferromagnetic materials.
2. Measure ferromagnetic resonance line width (ΔH) of microwave ferrite materials.
3. Measure the Lande’s g-factor of microwave ferrite.
4. Learn how to use a microwave experimental system.
* Some observed experimental results shown at left.
Specifications
| Microwave System | |
| Sample | 2 ( mono-crystal and poly-crystal, one each) |
| Microwave frequency meter | range: 8.6 GHz ~ 9.6 GHz |
| Waveguide dimensions | inner: 22.86 mm × 10.16 mm (EIA: WR90 or IEC: R100) |
| Electromagnet | |
| Input voltage and accuracy | Max: ≥ 20 V, 1% ± 1 digit |
| Input current range and accuracy | 0 ~ 2.5 A, 1% ± 1 digit |
| Stability | ≤ 1×10-3+5 mA |
| Strength of magnetic field | 0 ~ 450 mT |
| Sweep Field | |
| Output voltage | ≥ 6 V |
| Output current range | 0.2 A ~ 0.7 A |
| Solid State Microwave Signal Source | |
| Frequency | 8.6 ~ 9.6 GHz |
| Frequency drift | ≤ ± 5×10-4/15 min |
| Working voltage | ~ 12 VDC |
| Output power | > 20 mW under equal amplitude mode |
| Operation mode & parameters | Equal amplitude |
| Internal square-wave modulation | |
Repetition frequency: 1000 Hz
Accuracy: ± 15%
Skewness: < ± 20％Voltage standing wave ratio< 1.2Waveguide dimensionsinner: 22.86 mm × 10.16 mm (EIA: WR90 or IEC: R100)
Parts List
| Description | Qty |
| Controller Unit | 1 |
| Electromagnet | 1 |
| Support Base | 3 |
| Microwave System | 1 set (including various microwave components, source, detector, etc) |
| Sample | 2 ( mono-crystal and poly-crystal, one each) |
| Cable | 1 set |
| Instructional Manual | 1 |
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of China Wholesale SNR Manufacturers – LADP-4 Microwave Ferromagnetic Resonance Apparatus – Labor , The product will supply to all over the world, such as: Denmark, Australia, Bulgaria, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
By Michaelia from Ecuador - 2017.10.13 10:47
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Lynn from Algeria - 2017.02.18 15:54
