LPT-12 Fiber Communication Experiment Kit – Basic Model
Introduction
It’s a basic mode of fiber communication experiments, it’s cheaper and can perform most basic fiber optics experiments.
Experimental examples
1) Experiment of fundamental knowledge of optical fiber optics
2) Experiment of coupling method between optical fiber and light source
3) Multimode fiber Numerical Aperture (NA) measurement
4) Optical fiber transmission loss property and measurement
5) M-Z optical fiber interference experiment
6) Optical fiber thermal sensing principle
7) Optical fiber pressure sensing principle
Part List
| Description | Part No./Specs | Qty |
| He-Ne laser | (1.0 ~ 1.5 mW@632.8 nm) | 1 |
| Light power meter | 1 | |
| Beam splitter | 633 nm | 1 |
| Temperature controller | 1 | |
| Stress controller | 1 | |
| 5-axis adjustable stage | 1 | |
| Beam expander | f = 4.5 mm | 1 |
| Fiber clip | 2 | |
| Fiber support | 1 | |
| White screen | With cross | 1 |
| Laser holder | 1 | |
| Light target | 1 | |
| Power cord | 1 | |
| Single-mode fiber | 633 nm | 2 m |
| Single-mode fiber | With FC/PC connector on one end | 1 m |
| Multi-mode fiber | 633 nm | 2 m |
| Fiber spool | 1 km (9/125 μm bare fiber) | 1 |
| Fiber stripper | 1 | |
| Fiber scribe | 1 |
Write your message here and send it to us
