LCP-8 Holography Experiment Kit – Complete Model
Experiments
1. Fresnel holographic photography
2. Image plane holography
3. One-step rainbow holographic photography
4. Two-step rainbow holographic photography
5. Holographic grating fabrication
6. Holographic lens fabrication
7. High-density high-capacity holographic data storage
8. Holographic interferometry
9. Holographic reproduction
Specifications
|
Item |
Specifications |
| Semiconductor Laser | Center Wavelength: 650 nm |
| Line width: < 0.2 nm | |
| Power > 35 mW | |
| Exposure Shutter and Timer | 0.1 ~ 999.9 s |
| Mode: B-Gate, T-Gate, Timing, and Open | |
| Operation: Manual | |
| Continuous Ratio Beam Splitter | T/R Ratio Continuously Adjustable |
| Single-Sided Rotary Slit | Slit Width: 0 ~ 5 mm (continuously adjustable) |
| Rotation Range: ± 5° | |
| Holographic Plate | Photopolymer and Silver Salt |
Part List
| Description | Qty |
| Semiconductor laser | 1 |
| Laser safety goggles | 1 |
| Exposure shutter and timer | 1 |
| Universal magnetic base | 12 |
| Two-axis adjustable holder | 6 |
| Lens holder | 2 |
| Plate holder | 1 each |
| Two-axis adjustable holder | 1 |
| Sample stage | 1 |
| Single-sided rotary slit | 1 |
| Objective lens | 1 |
| Beam expander | 2 |
| Lens | 2 |
| Plane mirror | 3 |
| Continuous ratio beam splitter | 1 |
| Small object | 1 |
| Red sensitive polymer plates | 10 sheets, 90 x 240 mm per sheet, can cut to use |
| Silver salt holographic plates | 2 sheets, 200×250 mm per sheet, can cut to use |
| Tri-color safety lamp (red, green, or yellow) | 1 |
| Illuminometer | 1 |
| Information slide | 1 |
| Fixed ratio beam splitter | 2 |
| Instruction manual | 1 |
Note: a stainless steel optical table or breadboard (600 mm x 600 mm) with optimal damping is needed for use with this kit.
Write your message here and send it to us
