China Wholesale Millikans Experiment Suppliers – LADP-4 Microwave Ferromagnetic Resonance Apparatus – Labor
China Wholesale Millikans Experiment Suppliers – LADP-4 Microwave Ferromagnetic Resonance Apparatus – Labor Detail:
Experiments
1. Observe microwave ferromagnetic resonance phenomena of ferromagnetic materials.
2. Measure ferromagnetic resonance line width (ΔH) of microwave ferrite materials.
3. Measure the Lande’s g-factor of microwave ferrite.
4. Learn how to use a microwave experimental system.
Specifications
| Microwave System | |
| Sample | 2 ( mono-crystal and poly-crystal, one each) |
| Microwave frequency meter | range: 8.6 GHz ~ 9.6 GHz |
| Waveguide dimensions | inner: 22.86 mm × 10.16 mm (EIA: WR90 or IEC: R100) |
| Electromagnet | |
| Input voltage and accuracy | Max: ≥ 20 V, 1% ± 1 digit |
| Input current range and accuracy | 0 ~ 2.5 A, 1% ± 1 digit |
| Stability | ≤ 1×10-3+5 mA |
| Strength of magnetic field | 0 ~ 450 mT |
| Sweep Field | |
| Output voltage | ≥ 6 V |
| Output current range | 0.2 A ~ 0.7 A |
| Solid State Microwave Signal Source | |
| Frequency | 8.6 ~ 9.6 GHz |
| Frequency drift | ≤ ± 5×10-4/15 min |
| Working voltage | ~ 12 VDC |
| Output power | > 20 mW under equal amplitude mode |
| Operation mode & parameters | Equal amplitude |
| Internal square-wave modulation | |
Repetition frequency: 1000 Hz
Accuracy: ± 15%
Skewness: < ± 20%Voltage standing wave ratio< 1.2Waveguide dimensionsinner: 22.86 mm × 10.16 mm (EIA: WR90 or IEC: R100)
Parts List
| Description | Qty |
| Controller Unit | 1 |
| Electromagnet | 1 |
| Support Base | 3 |
| Microwave System | 1 set (including various microwave components, source, detector, etc) |
| Sample | 2 ( mono-crystal and poly-crystal, one each) |
| Cable | 1 set |
| Instructional Manual | 1 |
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for China Wholesale Millikans Experiment Suppliers – LADP-4 Microwave Ferromagnetic Resonance Apparatus – Labor , The product will supply to all over the world, such as: Riyadh, Greenland, Netherlands, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
Write your message here and send it to us







